How to Measure Rubber Track Size Easily
Quick Way: Find the Part Number
The part number is the fastest and most reliable way to identify the correct rubber track size.
It is stamped or molded on the inside surface of the rubber track, usually along the inner side between the drive lugs. This number directly represents the track specifications, including width, pitch, and link count, often shown in formats like 400×86×56.
In real working conditions, the marking is often covered by mud, grease, or debris. You need to clean the inner surface thoroughly using a scraper, degreaser, or wire brush to clearly expose the number. If the track is worn, use a flashlight at a low angle to identify the molded characters.
Once you find the part number, you can immediately match the exact replacement track without any measurement.
Standard Way: Measure Track Size
Measure the Width
The first value is the easiest to identify—just measure the track width in millimetres. If measured in inches, convert it: 1 inch = 25.4 mm.
Measure the Track Pitch
The second value is measured by the distance between drive lugs in millimetres. Always measure from the center of one lug to the next to ensure accuracy, not the open gap between them.
Count the Links
To determine the final value, count the number of teeth or links along the inner circumference of the track. These connect with the sprocket and help drive the machine.
Safe Way: Confirm with Supplier
The safest way to avoid mistakes is to confirm the track size with a professional supplier.
You can provide:
- Part number (if available)
- Measured size (width, pitch, links)
- Machine brand and model
An experienced supplier can quickly verify the correct track and recommend the best option based on your working conditions.
This step helps you avoid ordering the wrong track and reduces downtime and replacement costs.
Conclusion
Identifying the correct rubber track size is simple when you follow the right method:
- Check the part number for the fastest result
- Measure manually if needed
- Confirm with a supplier for 100% accuracy
Choosing the right track ensures better performance, longer service life, and lower operating costs.
Need Help Confirming Your Rubber Track?
If you are unsure about your rubber track size or cannot find the part number, we are always ready to help.
At Global Rubber Track, we provide professional support to quickly identify the correct rubber track based on your machine model, measurements, or existing track condition. Our team ensures you get the right replacement to avoid downtime and installation issues.
Feel free to contact us anytime with your requirements. We will be happy to assist you with fast and accurate rubber track matching and solutions.
👉 Contact our team here: https://globalrubbertrack.com/contact/